SUS 304 Lab Best Milk Powder Spray Dryer (YC-015)
Basic Info
Model No.: YC-015
Product Description
YC-015 lab spray dryer operating principle
PLC controller allows the selection of inlet temperature, airflow, automatic de-blocker frequency and pump speed. The self-priming peristaltic pump delivers the sample liquid from a container through a small diameter jet into the main chamber. At the same time an integral compressor pumps air into the outer tube of the jet which causes the liquid to emerge as a fine atomised spray into the drying chamber. Heated air is blown through the main chamber evaporating the liquid content of the atomised spray. The solid particles of the material, which are normally in a free flowing state, are then separated from the exhaust air flow by a cyclone and collected in the sample collection bottle. The exhaust airflow is directed through a flexible 60 mm diameter hose direct to atmosphere or to an existing extraction system.
YC-015 lab spray dryer technical parameter
1. Automatic-mode and Eye-monitored mode for the purpose of easily controlling experimental process ,English interface. 2. Evaporation rate of water at inlet temperature of 250ºC using Standard:Approximately 1500 ml/hour 3. Air inlet temperature range 30ºC to250ºC 4. Air outlet temperature range 30ºC to 140ºC 5. Max. Sample feed: 1500ml/h 6. Min. Sample : 30mL 7. To assure accurate temperature control and easy parameter adjusting, YC-015 applies PID. Temp. Precision:±1ºC, dry cycle time: 1.0-1.5S 8. As standard a touch screen to display temperature, airflow volume, air pressure,pump speed and de-blocker frequency. 9. standard with 0.7 mm jet and other sizes are available as accessories(0.5mm 1mm 1.5mm 2mm) 10.Spray chamber, cyclone separator, receiving tank are all made of Borosilicate glass which can resist strong acid/alk li, high temperature. It can work in a no-pollution and stable environment, and the whole process can be inspected. All the spare parts are easy to install and wash. 11. Power: 3.5KW AC220V 12. With cooling device for temperature-sensitive material (optional)
YC-015 lab spray dryer applications
Spray drying can be used in a wide range of applications where the production of a free-flowing powder sample is required. This technique has successfully processed materials in the following areas: Beverages Flavours and Colourings Milk and Egg Products Plant and Vegetable Extracts Pharmaceuticals Heat Sensitive Materials Plastics Polymers and Resins Perfumes Ceramics and Advanced Materials Soaps and Detergents Blood Dyestuffs Foodstuffs Adhesives Oxides Textiles Bones, Teeth and Tooth Amalgam and many others. Most solutions and suspensions can be spray dried providing that the resulting product has the characteristics of a solid material. Shanghai Pilotech Lab Spray Dryer With firm grasp of domestic market advantage, Pilotech also vigorously (Model YC-015A lab spray dryer can be used for organic & water solvents, Model YC-1800 lab low temperature spray dryer can be used for thermo-sensitive materials and high carbohydrate compositions materials. Model YC-2000 lab vacuum spray dryer can be used for probiotics, enzyme and other thermo-sensitive materials. Model YC-3000 Lab spray Freeze Dryer is a new freeze dryer method which is faster than traditional freeze dryer. Model YC-1000 laboratory spray Granulator (fluidized bed granulation) can be used for granulation and coating.)
Sr.no | Parameter | Pilotech YC-015 Mini Spray Dryer |
1 | Power | 3500W |
2 | Voltage | 220V,50/60 Hz |
3 | Atomizer material | SUS 316 Stainless steel |
4 | Evaporating Capacity | 1.5 l/h for water |
5 | max. Input temperature | 250°c |
6 | Heating capacity | 3000W |
7 | Heating control | ±1°c |
8 | Spray gas | 4.2m³/h, 2-5bar |
9 | Nozzle tip diameter | 0.7mm standard/(0.5/0.75/1.0/1.5/2.0mm available) |
10 | Nozzle type | Two fluid nozzle |
11 | Possible particle diameter range | 1-25µm |
12 | Mean Residence time | 1.0-1.5 sec |
13 | Operation mode | Automatic/Manual |
14 | Max. Sample feed | 2000ml/hr |
15 | Minimum sample volume | 30ml |
16 | Spray chamber material | borosilicate glass |
17 | Cyclone separator material | borosilicate glass |
18 | Receiving tank material | borosilicate glass |
19 | Body material | SUS-304 Stainless steel |
20 | Seal of cyclone/cylinder | Silicone |
21 | Compressor | Built-in oilless |
22 | Sound | <60db |
23 | Dimensions | 750*650*1200mm |
24 | Weight | 110KG |
25 | Display | 7-Inch LCD display for Heat, Spray, Pump, Air pressure, de-blocker frequency |
26 | Thermal protection | Blower does not stop until temp <90°c |
27 | Deblocking | Automatic |
28 | Inert loop (for organic solvents) | Optional |
Contact us if you need more details on Spray Dryer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Mini Spray Dryer、Lab Spray Dryer. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Lab Spray Dryer
Premium Related Products