Lab Liquid to Powder Dryer Machine with Ce Certification

Model NO.: YC-015 Application: Slurry Operating Pressure: Atmospheric Cloth Membrane Forms: No Vacuum Drying Equipment Type: Spray Dry Item Name: Lab Spray Dryer Model: Yc-015 Nozzle Material: SUS316L Stainless Steel Dry Cycle Time: 1.0-1.5s Voltage: 220V,50/60 Hz Trademark: Pilotech Origin: Shanghai Type: Spray drying equipment Fuel: No Roller Number: No Fluid Bed drying equipment Type: No Condition: New Brand: Yacheng Body Material: SUS304 Stainless Steel Capacity: 1500-2000ml/H Power: 3500W Airflow: 0-330 M3/H Specification: CE HS Code: 8419399090 15 years continuous development The Mini Spray Dryer YC-015 is the result of 15 years continuous development ,is your choice for the quick and gentle drying to powder of liquid material. The impressive features of the Spray Dryer include its efficient performance with very short set-up times,an effective integrated nozzle cleaning mechanism and a high degree of flexibility thanks to the different cylinder geometries. The system was designed to be stand by a keyboard, conducted by a colorful crystal screen of touch guidance mode , and allowed two modes of run: Automatic-mode, and Eye-monitored mode for the purpose of easily controlling experimental process .   YC-015 mini spray Dryer easy to use 1.Color Touch Screen,Fast setup and cleaning times 2.Scale up to pilot or industrial scale possible. 3.Visible process due to glass assembly 4.Adjustable particle size (1 - 25 microns)

Controls & Functionality YC-015 mini spray dryer is designed to ensure that all functions are simple to select and adjust, to quickly achieve the optimum conditions for spray drying. Both use a clear touch screen display , the operator can control the following functions: • Inlet Temperature • Airflow Volume • Air compressor flow • Pump Speed • De-blocker Frequency   Preparation Convenience   The minimum of materiel only needs 20-30 ml,  which is convenient for dealing with small amount of sample, and it's maximum capacity can up to 2000ml/H as well as the dealing with vast material is also very rapidly.
  Temperature Protection The heater has an extreme high temperature when experiment finished, which needs air blower to continue working in order to reduce the inside temperature and ensure the safety of equipment, YC-015 spray dryer can control air blower running automatically, even the operator wants to turn off the air blower, the system would prevent the operator until the temperature of system reduce to the default security state of system .   Air compressor built-in   Oil free compressor built-in with cushion technique, lower noise and convenient to move the dryer. Compressed air container made from the SUS 304 stainless steel to avoid vapor corrosive damage.   Two Fluid nozzle SUS 316L stainless steel The stainless steel spray assembly consists of an inner tube for the liquid sample leading to a small diameter jet. An outer tube directs compressed air to the nozzle. All units are supplied with 0.7mm jets, other sizes are available as accessories.The spray assembly incorporates an automatic de-blocking device that prevents the jet nozzle from becoming blocked, the de-blocking needle is activated by an integral compressor. De-blocker is sometimes necessary with materials which may solidify or when large particles in suspension cause blockages in the jet.   Borosilicate Glass or SUS 304 stainless steel Spray chamber, cyclone separator, collector are all made of Borosilicate glass which can resist strong acid/alkali, high temperature. It can work in a no-pollution and stable environment, and the whole process can be inspected. And we can provide SUS 304 stainless steel parts .All the spare parts are easy to install and clean.         (Model YC-015A lab spray dryer can be used for organic & water solvents, Model YC-1800 lab low temperature spray dryer can be used for thermo-sensitive materials and high carbohydrate compositions materials. Model YC-2000 lab vacuum spray dryer can be used for probiotics, enzyme and other thermo-sensitive materials. Model YC-3000 Lab spray Freeze Dryer is a new freeze dryer method which is faster than traditional freeze dryer. Model YC-1000 laboratory spray Granulator (fluidized bed granulation) can be used for granulation and coating.)
 
Technical information
 

Sr.no	Parameter	Pilotech YC-015
1	Power	3500W
2	Voltage	220V
3	Frequency	50/60 Hz
4	Evaporating Capacity	1.5 to 2.0 l/h for water
5	Airflow	0-330 m3/h
6	Motor control
7	max. Input temperature	300°c
8	Heating capacity	3500W
9	Heating control	±1°c
10	Spray gas	4.2m3/h, 2-5bar
11	Nozzle tip diameter	0.7mm standard/(0.5/0.75/1.0/1.5/2.0mm available)
12	Nozzle type	Two fluid nozzle
13	Possible particle diameter range	1-25µm
14	Mean Residence time	1.0-1.5 sec
15	Operation mode	Automatic/Manual
16	Max. Sample feed	2000ml/hr
17	Minimum sample volume	30ml
18	Spray chamber material	borosilicate glass
19	Cyclone separator material	borosilicate glass
20	Receiving tank material	borosilicate glass
21	Body material	SUS-304 Stainless steel
22	Seal of cyclone/cylinder	Silicone
23	Compressor	Built-in oilless
24	Sound	<60db
25	Dimensions	750*650*1200
26	Weight	110KG
27	Display	7-Inch LCD display for Heat, Spray, Pump, Air pressure, de-blocker frequency
28	Thermal protection	Blower does not stop until temp <90°c
29	Deblocking	Automatic
30	Inert loop (for organic solvents)	Optional
31	Spray chilling	Optional

Contact us if you need more details on Spray Dryer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Lab Spray Dryer、Drying Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Lab Spray Dryer