Model No.: YC-2000
Fast drying of thermo-sensitive material has always baffled scientific research personnel. General vacuum drying and spray drying bring great damage to material biological activity or structure. Freeze drying is time-consuming and inefficient, and dried materials are in bulks which require a second grinding. Based on long-term contact with research personnel, Shanghai Pilotech Instrument & Equipment Co., Ltd has realized that low-temperature Spray Dryer can effectively help research personnel solve thermo-sensitive material drying difficulty and deliberately developed YC-2000 laboratory low-temperature dryer. YC-2000 fully retains beauties of YC-015 laboratory spray dryer with innovative combination of advantages of vacuum drying. It can conduct rapid drying (1 second) with an inlet air temperature of 50ºC, which completely avoids damage to material activity and structure during the drying process and provides very convenient and safe drying method for thermo-sensitive material drying, such as enzyme preparation viable bacteria, high carbohydrate traditional Chinese medicine natural product extract, thermolabile polymer material, heat gasification material and so on.
YC-2000 laboratory low-temperature spray dryer is deliberately designed for thermo-sensitive materials by Shanghai Yacheng Instrument & Equipment Co., Ltd and American PILOTECH. The entire machine is compact and complete with no need of any other facility to operate. One-touch boot, large color LCD touch screen, either automatic or manual control, convenient for monitoring of operation and experiment. In particular, it achieves rapid material drying at low temperature (50ºC) and provides very convenient and safe drying method for thermo-sensitive materials, such as biological product, high carbohydrate traditional Chinese medicine natural product extract, thermolabile polymer material, heat gasification material and so on.
1) Spray dry at low temperature (60ºC) using for thermosensitive material.
2)7" high-resolution LCD, human-oriented interface, Chinese and English menu, Optimize operation procedure, efficiency, flexibility, easy-going and easy learning.
3)Patrticle size with normal distribution
4)Two fluid atomizing structure, made of SUS 304(316 optional)Stainless steel. Easy operating.
5)To assure accurate temperature control and easy parameter adjusting, YC-2000 applies PID.
6)The self-priming peristaltic pump delivers the sample liquid from a container through a small diameter jet into the main chamber to avoid secondary pollution, capacity: 600~1800mL/H
1,Two fluid atomizing structure, made of SUS 304(316 optional)Stainless steel. Easy operating.
2,Automatic de-blocking device prevents the nozzle from becoming blocked and variably controlled
5,To assure accurate temperature control and easy parameter adjusting, YC-2000 applies PID.
6,Standard with 0.7mm jet and other sizes are available as accessories
8,Spray dry at low temperature (inlet temp. 60~80ºC) using for thermosensitive material.
10,7" high-resolution LCD, PLC controller
11,Inlet air temp.: 60~150ºC
12,Outlet air temp.: 45ºCavailable
|Sr.no||Parameter||Pilotech YC-2000 vacuum spray dryer|
|2||Evaporating Capacity||1000~1500mll/h for water|
|3||min. Input temperature||55ºC|
|6||Spray gas||4.2m/h, 2-5bar|
|7||Nozzle jet||0.7mm standard/(0.5/0.75/1.0/1.5/2.0mm available)|
|8||Nozzle type||Two fluid nozzle|
|9||Possible particle size range||1-25µm|
|11||Max. Sample feed||1500ml/hr|
|12||Minimum sample volume||30ml|
|13||Spray chamber material||SUS-304 Stainless steel|
|15||Cyclone separator material||SUS-304 Stainless steel|
|16||Body material||SUS-304 Stainless steel|
|17||Seal of cyclone/cylinder||Silicone|
|21||Display||7-Inch LCD display for Heat, Spray, Pump, Air pressure, de-blocker frequency|
|22||Thermal protection||Blower does not stop until temp <90ºC|
|24||Atomizer material||SUS 316 Stainless steel|
Product Categories : Lab Spray Dryer