Triple Effect Evaporating System (RNJM03-3200)
Basic Info
Model No.: RNJM03-3200
Product Description
Model NO.: RNJM03-3200 Customized: Customized Composition: Evaporating Machine Process: Evaporator Density of Inputting Materia: 11.5~12 % Steam Pressure: 0.6-0.8 Mpa Evaporating Temperature: 45 Centigrades Sterilizing Temperature: 86-94 Centigrades Warranty: 1 Year Transport Package: Wooden Case Origin: China Condition: New Voltage: 380V Processing Material: Medicine,Dairy,Beverage etc Water Evaporating Capacity: 3200 Kg/H Density of Outputting Material: 45-48 % Steam Cost: 1200 Kg/H Heating Temperature: 57 Centigrades Cooling Water Cost: 24 Kg/H Trademark: RUIPAI Specification: CE, ISO9001 Product Description:
Application:
Double effect, three effect evaporator is commonly used in low temperature concentration in industries such as: Dairy, glucose, starch, xylose, pharmacy, chemicals, biochemical project, environmental protection project, and waste liquid recycle.
System composition:
Evaporating machine, dispenser, cooling machine hot pressure pump, sterilizer, warm keeping pipe, vacuum system, drainage system, liquid exchanging pump, gas separating tank, operation platform, measuring appliance cabinets, and valves and pipes.
Manufacturing standard:
1. The designing and manufacturing of machine is up to national standard GB151, reliable, and endurable.
2. The surface in touch with the material is made in SUS304 stainless steel 2B. The inner wall of the film -down pipe adopts fine craft which smoothes the inner wall. The film gluing craft is adopted to protect the original smooth finish, only the joints polished evenly and nearly, and the joint polish 1.6um.
3. All stainless active joints adopt English size; Butterfly valve is copied from the imported, round screw. The seal-packing collar is made in EPDM.
Main characteristics:
1. The design of the whole set is fine, steadily operating, high-efficiency, energy saving, and low steam cost. 2. High concentration proportion, film-down vaporization and forced recycle make the dense liquid easily flow and vaporize so to shorten the time.
3. Special design can be exchanged easily through simple operation to fit to product different productions.
4. Low evaporating temperature, part of the second stem steam is absorbed into single effect evaporating machine by spraying hot pressure pump to make full use of heat, the liquid warmly heated, so the machine suits to concentrate heat sensitive materials.
5. The material is sprayed in the evaporating machine through the top, the forced filming evenly place the liquid in the film pipe inside the evaporating machine, which greatly increase the heat transferring speed and evaporating, so to stop "inner wall drying ".
6. The liquid, after steam and gas dispensing in the bottom of the evaporating machine, enters the dispenser to dispense again, which enforces the effect, and make the whole equipment flexible in operation.
7. The equipment adopts vertical standing and compact construction, taking little space, simple layout, which stands for developing trend of the large scale set Evaporating Equipment.
8. Continuously inputting material, the liquid enters the equipment by one step can reach the required density. 9. The two steps of sterilizing and condensing can finish in one-step, short material heating time, fit to condense the heat sensitive liquid.
10. The CIP cleaning pipe in the equipment can realize the cleaning in spot. The whole set is simple operated and no dead angles.
11. Special constructed cooling machine can operate normally in cooling water temperature of 30centigrade or even higher.
12. The motor control is realized by controlling cabinet and the automatic controlling system can be fixed to the order.
13. Condenser specialized pump is with reliable seal, steady performance, needing little maintain, and smooth operation.
14. The equipment can operate eight hours continually without cleaning.
Application:
Double effect, three effect evaporator is commonly used in low temperature concentration in industries such as: Dairy, glucose, starch, xylose, pharmacy, chemicals, biochemical project, environmental protection project, and waste liquid recycle.
System composition:
Evaporating machine, dispenser, cooling machine hot pressure pump, sterilizer, warm keeping pipe, vacuum system, drainage system, liquid exchanging pump, gas separating tank, operation platform, measuring appliance cabinets, and valves and pipes.
Manufacturing standard:
1. The designing and manufacturing of machine is up to national standard GB151, reliable, and endurable.
2. The surface in touch with the material is made in SUS304 stainless steel 2B. The inner wall of the film -down pipe adopts fine craft which smoothes the inner wall. The film gluing craft is adopted to protect the original smooth finish, only the joints polished evenly and nearly, and the joint polish 1.6um.
3. All stainless active joints adopt English size; Butterfly valve is copied from the imported, round screw. The seal-packing collar is made in EPDM.
Main characteristics:
1. The design of the whole set is fine, steadily operating, high-efficiency, energy saving, and low steam cost. 2. High concentration proportion, film-down vaporization and forced recycle make the dense liquid easily flow and vaporize so to shorten the time.
3. Special design can be exchanged easily through simple operation to fit to product different productions.
4. Low evaporating temperature, part of the second stem steam is absorbed into single effect evaporating machine by spraying hot pressure pump to make full use of heat, the liquid warmly heated, so the machine suits to concentrate heat sensitive materials.
5. The material is sprayed in the evaporating machine through the top, the forced filming evenly place the liquid in the film pipe inside the evaporating machine, which greatly increase the heat transferring speed and evaporating, so to stop "inner wall drying ".
6. The liquid, after steam and gas dispensing in the bottom of the evaporating machine, enters the dispenser to dispense again, which enforces the effect, and make the whole equipment flexible in operation.
7. The equipment adopts vertical standing and compact construction, taking little space, simple layout, which stands for developing trend of the large scale set Evaporating Equipment.
8. Continuously inputting material, the liquid enters the equipment by one step can reach the required density. 9. The two steps of sterilizing and condensing can finish in one-step, short material heating time, fit to condense the heat sensitive liquid.
10. The CIP cleaning pipe in the equipment can realize the cleaning in spot. The whole set is simple operated and no dead angles.
11. Special constructed cooling machine can operate normally in cooling water temperature of 30centigrade or even higher.
12. The motor control is realized by controlling cabinet and the automatic controlling system can be fixed to the order.
13. Condenser specialized pump is with reliable seal, steady performance, needing little maintain, and smooth operation.
14. The equipment can operate eight hours continually without cleaning.
Technical parameter | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Categories : Evaporator and Concentrator Premium Related Products Other Products
Hot Products YZG/FZG Vacuum DryerYS Series Fluid Bed Hopper Lifting Machine (Lifting machine )Vertical Fluidizing Dryer used in feedJCT Series Special Oven for pharmaceuticalGZQ Series Rectilimear Vibrating-Fluidized Drier machine for chemical industryInstant soluble capsules production linefood granule making machine(laboratory dry granulatorBall granulating machine for ceramic industrysmall wooden product for mesh-belt dryerDLB fluid bed fertilizer fluid bed coater for granulating the materialSZG Series Conical Vacuum Dryer used in leesLG series roller compactor used in tablet capsuleMini Vacuum Freeze DryerIndia Graphene Vacuum DryerLimestone flash dryerMoringa powder leaf drying machine |