High Quality Vacuum Evaporating Equipment, Oxygen Concentrator, Pipe Vacuum Evaporator Suppliers in China

Home > Products > Evaporator and Concentrator > Single Effect Evaporating System (Rnjm01-600)

Single Effect Evaporating System (Rnjm01-600)

Basic Info

Model No.:  RNJM01-600

Product Description

Model NO.: RNJM01-600 Customized: Customized Composition: Evaporating Machine Process: Evaporator Density of Inputting Materia: 11.5~12 % Steam Pressure: 0.6-0.8 Mpa Evaporating Temperature: 60 Centigrades Sterilizing Temperature: 86-94 Centigrades Warranty: 1 Year Transport Package: Wooden Case Origin: China Condition: New Voltage: 380V Processing Material: Medicine,Dairy,Beverage etc Water Evaporating Capacity: 600 Kg/H Density of Outputting Material: 45-48 % Steam Cost: 420 Kg/H Heating Temperature: 70 Centigrades Cooling Water Cost: 6 Kg/H Trademark: RUIPAI Specification: CE, ISO9001 Product Description:

Double effect, three effect evaporator is commonly used in low temperature concentration in industries such as: Dairy, glucose, starch, xylose, pharmacy, chemicals, biochemical project, environmental protection project, and waste liquid recycle.

System composition:
Evaporating machine, dispenser, cooling machine hot pressure pump, sterilizer, warm keeping pipe, vacuum system, drainage system, liquid exchanging pump, gas separating tank, operation platform, measuring appliance cabinets, and valves and pipes.

Manufacturing standard:
1. The designing and manufacturing of machine is up to national standard GB151, reliable, and endurable.
2. The surface in touch with the material is made in SUS304 stainless steel 2B. The inner wall of the film -down pipe adopts fine craft which smoothes the inner wall. The film gluing craft is adopted to protect the original smooth finish, only the joints polished evenly and nearly, and the joint polish 1.6um.
3. All stainless active joints adopt English size; Butterfly valve is copied from the imported, round screw. The seal-packing collar is made in EPDM.

Main characteristics:
1. The design of the whole set is fine, steadily operating, high-efficiency, energy saving, and low steam cost. 2. High concentration proportion, film-down vaporization and forced recycle make the dense liquid easily flow and vaporize so to shorten the time.
3. Special design can be exchanged easily through simple operation to fit to product different productions.
4. Low evaporating temperature, part of the second stem steam is absorbed into single effect evaporating machine by spraying hot pressure pump to make full use of heat, the liquid warmly heated, so the machine suits to concentrate heat sensitive materials.
5. The material is sprayed in the evaporating machine through the top, the forced filming evenly place the liquid in the film pipe inside the evaporating machine, which greatly increase the heat transferring speed and evaporating, so to stop "inner wall drying ".
6. The liquid, after steam and gas dispensing in the bottom of the evaporating machine, enters the dispenser to dispense again, which enforces the effect, and make the whole equipment flexible in operation.
7. The equipment adopts vertical standing and compact construction, taking little space, simple layout, which stands for developing trend of the large scale set Evaporating Equipment.
8. Continuously inputting material, the liquid enters the equipment by one step can reach the required density. 9. The two steps of sterilizing and condensing can finish in one-step, short material heating time, fit to condense the heat sensitive liquid.
10. The CIP cleaning pipe in the equipment can realize the cleaning in spot. The whole set is simple operated and no dead angles.
11. Special constructed cooling machine can operate normally in cooling water temperature of 30centigrade or even higher.
12. The motor control is realized by controlling cabinet and the automatic controlling system can be fixed to the order.
13. Condenser specialized pump is with reliable seal, steady performance, needing little maintain, and smooth operation.
14. The equipment can operate eight hours continually without cleaning.
Technical parameter
Model RNJM01-600 RNJM01-800 RNJM01-1000 RNJM01-1200 RNJM01-1600
Water evaporating capacity Kg/h 600 800 1000 1200 1600
Density of inputting material%
It can be made to order
Density of outputting material%
It can be made to order
Steam Pressure Mpa     0.6~0.8    
Steam cost Kg/h 420 560 700 840 1100
Evaporating temperature
Single effect
Heating temperature
Single effec
Sterilizing temperature centigrade     86~94    
Cooling water cost(Inputting water20centigrade,outputting water40centigrade) 6 8 10 12 16
Total power 15.5 15.5 19.5 19.5 19.5
Size(L*W*H) 3.9×2.3×6.5 3.9×2.3×7 3.9×2.4×7.5 3.9×2.4×8 3.9×2.4×8.5
  Notice:We can make according to order besides the model listed the form.

Contact us if you need more details on Single Effect Evaporating System. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Evaporating System、Evaporating Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Evaporator and Concentrator

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters