Stainless Steel Double Conical Rotary Vacuum Dryer China Manufacturer

All Categories

New Products

Home > Products > Vacuum Drying Equipment > Double Cone Rotary Vacuum Dryer > Stainless Steel Double Conical Rotary Vacuum Dryer

Stainless Steel Double Conical Rotary Vacuum Dryer

Product Description

Double-Cone Vacuum Dryer

Double cone rotating vacuum Drying Machine system, including drying machine main body, vacuum device, the condenser and steam heating system four constituent, set with inlet drier main body top, bottom Settings have discharging mouth, feeding port and discharging port respectively set the inlet valve and the discharge valve, dry setting of main body has a jacketed layer and inner layer, described by adding hot water and steam heating jacketed layer, the inner good contact with the inner heat and material after heating.

Main Characteristics

➤Good sealing performance: concentric degree of shaft are controlled well, both ends use mechanical sealing.

➤ Good rigidity: Both ends of the cone are welded together with the cone vessel as a whole. It is not easy to be deformed.
➤Steady transmission: The whole unit is driven by the electrical motor, reducer, big and small gears, which enables the unit run more stably and reliably.
➤Mounted with CIP and SIP device.
➤ Design with SIP, CIP dedicated device

➤The cone angle is designed as 60° which prevents materials from pilling during rotary process, and avoids powder retention during discharging.

➤The special design of vacuum pipes and vacuum filter increase the loading coefficient, which can even reach 65%.

➤The device includes three layers. The parts touching with materials Jacket in the middle is for hot water circulation. To prevent stainless steel and carbon steel from producing static corrosion, the jacket must be made from stainless steel, and the outer layer uses fiberglass cotton for heat preservation.

Products Description

Customer Site

Technical Parameter

Specification （L）	Capacity （L）	Drive power （kw）	Rotate speed （rpm/min）	Host weight （kg）	Diathermanous area of condensator （㎡）
20	≤10	0.55	6	300	3
50	≤25	0.55	6	450	3
100	≤50	0.75	6	820	3
...	...	...	...	...	...
18000	≤9000	30	2.2	20150	200

Our Advantage

Zhanghua VS Other	High concentricity of two axes of equipment， 20L-3000L with the concentric degree ≤ 0.16mm, 3000L-5000Lconcentricity ≤ 0.20mm,5000L - 18000L concentricity ≤0.25 mm. More stable operation, better sealing performance, longer service life
	New advanced airtight technology, vacuum ≤ 030Pa, improve product quality, can be used for aseptic grade product production
	Clean CIP online (if configured) to reduce labor and equipment pollution
	Online sterilized SIP (if configured), capable of producing sterile products
	Online weighing system (if configured) eliminates the need for weighing after secondary material transfer to reduce labor force and improve measuring accuracy
	Polishing precision up to 0.014μm, (if configured), easy to clean equipment, prevent material sticking to the wall
	Double taper with knife (if available) to prevent pilling of sticky materials during drying
	The first in China, the double cone produced in 1978, is still in use by users, with reliable performance. With nearly 40 years of experience, it has produced no less than 1000 sets

Design / Calculation Software

Custom Service

➤Our Products for pharmaceutical and chemical industries
1. Multifunctional “Three in One” (filtering, washing and drying)

2. Crystallizing Tank, Reaction Kettle
3. Sterile double-cone Dryer
4. Rake Vacuum Dryer/Paddle Dryer
5. Plate-fin heat exchanger
➤Our advantage
1. Special Equipment: Pressure Equipment, Equipment made of anti-corrosion materials, Sterile Equipment
Equipment made of anti-corrosion materials includes: anti-corrosion lining plastic/ PTFE/ enamel,

Ti/HC22/Mone11
2.Customized Design: Double-Cone in 20L-20m³
Rake Dryer (with mechanical seal) in 16 m³
DN300-DN600 “Three in One”
3.Design/Calculation Software
➤scope of business
1. On-site Inspection
2. Technical Innovation Plan for Equipment Technical Improvement Plan for Equipment’s Structure Optimization Fast and Effective Solution to Equipment Malfunctions Highly Efficient and Precise On-site Construction Service Commitment to a Deadline in Customization A Full Range of long-term on-site technical maintenance service
3. Maintenance
4. Technical Solutions
5.On-site Testing and Training
6. Spare Parts

Company Profile

Contact us if you need more details on Double Cone Powder Mixer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Double Cone Mixer、Double Cone Blender. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Vacuum Drying Equipment > Double Cone Rotary Vacuum Dryer

Hot Products

YZG/FZG Vacuum Dryer YS Series Fluid Bed Hopper Lifting Machine (Lifting machine )Vertical Fluidizing Dryer used in feed JCT Series Special Oven for pharmaceutical GZQ Series Rectilimear Vibrating-Fluidized Drier machine for chemical industry Instant soluble capsules production line food granule making machine(laboratory dry granulator Ball granulating machine for ceramic industry small wooden product for mesh-belt dryer DLB fluid bed fertilizer fluid bed coater for granulating the material SZG Series Conical Vacuum Dryer used in lees LG series roller compactor used in tablet capsule Mini Vacuum Freeze Dryer India Graphene Vacuum Dryer Limestone flash dryer Moringa powder leaf drying machine